There is no such idea as too much bandwidth, either you’re working at home, streaming, or being on Twitch. Even if your router has gigabyte fiber installed, everyone could benefit from some assistance in accessing high-speed internet all around the house. It shouldn’t matter whether you have the greatest wiring outside your property; eradicating lower connections and Wi-Fi blind zones is largely your responsibility. To assist you, we’ve compiled a list of tips for troubleshooting and, hopefully, improving the quality of your Wi-Fi both in and out of your home.

Jom Apply Time internet Malaysia
  1. Move Router

Your Wi-Fi signal can be blocked by bookshelves, cabinets, walls, etc. There would be a significant impact on the speeds you get and the range of its wireless transmissions if you physically change the router’s location. The ideal location for your router will vary depending on your house, but avoid hiding it in a corner, beneath a cupboard, or in a drawer. The higher visibility it is, the better. You may need to use some creative wiring to have your network in a good spot, but the end result will be well worth the effort. Place your major devices such as consoles and laptops, as close to your router as possible. Keep it away from other gadgets that use electromagnetic radiation if at all possible.

  1. Use Network Cable

In most cases, a wired network to the router is advantageous to a cordless one. It’s more reliable and speedier, and it’s unaffected by other gadgets or enormous fish tanks. The disadvantage is that it restricts where you can place your devices and makes things less convenient in general. Even so, it’s frequently worth the time and effort to install a wire for technology that requires the quickest connection possible like a console, laptop or desktop, or streaming box. All you’ll need is an Ethernet wire and a router with a few spare Ethernet ports. You’ll need to use cable management to keep things neat and avoid having cords trailing over the floor. These small brackets keep the cable attached to the walls.

  1. Switch the Band or Channel

Channels are used to divide the Wi-Fi signal. Your router communicates with the devices in your home via a specific Wi-Fi channel, and if you do have neighbors with routers that have a similar Wi-Fi channel, things can soon become congested. This problem can be solved by changing channels.

This will be handled differently by each router. If you’re not sure, check the device’s manuals or search up the instructions online, however you will be able to find the choice somewhere in the device’s settings. The channels to attempt are 1, 6, and 11, as they will have the least amount of interference when several devices are connected.

As for the band, the majority of routers today utilize dual-band technologies, broadcasting at both 2.4 and 5 GHz. You could be able to prioritize either one for certain devices if your router options allow it. The 5-GHz band will provide you with a speedier internet connection, but it has a smaller range than 2.4 GHz. As older devices often only work on 2.4 GHz, we recommend leaving both frequencies enabled.

On the other hand, Jom Apply Time internet Malaysia is a great choice as it provides a fast internet connection, and it is affordable and reliable as well.